Cable Locator System
The MPM Cable Locator System consists of a receiver, underwater antenna, and a shore based transmitter. The receiver is capable of receiving specific frequencies in addition to 60 Hz typically found on an active power cable. The transmitter is able to transmit RF signals on power and communication cables for distances in excess of ten miles. Able to positively identify the location of active and inactive power and communications cables.
Metal Detector
The JW Fisher Pulse 8X underwater metal detector is the highest performance pulse induction metal detector on the market today. Extremely user friendly and has excellent meter and audio response to targets. It is has a heavy duty commercial construction and is good to 200 ft. Call for price and availability.
Manual Hot Tap
The T-101 Drilling Machine can be used on pipelines with a maximum working pressure of 1,480 psi at 100F. The unit can be utilized on the surface or underwater using air or hydraulic drivers or using the manual driver. It has a maximum travel of 18″ and can tap holes from 1/2″ through 4″. Call for price and availability.
Hydraulic Hot Tap
The MPM Hot Tap is hydraulically operated and has a MAOP of 3000 psi. The system is designed for surface or underwater use and has been used to depths of 300 feet. Project specific saddle assemblies allow tapping into tubulars from 1-1/2″ to 30″OD with surface defects of up to .25″ in depth. Call for price and availability.
Oil in Water Monitors
MPM offers an in line oil in water monitor from Turner Designs. Its fluorescence sensor technology provides high accuracy and repeatability. Delivered ready for installation with a pressurized side stream from the process.
Handheld Oil in Water Monitors
MPM also offers a hand held oil in water monitor from Turner Designs. Light, small, easy to use and the most accurate and repeatable device on the market for measuring crude oil and condensates in produced water, de-salter tail water, tank bottoms, or cargo heaters. Call for price and availability.
Portable Hydrotest Pump
This unit is designed to be used in the shop or wherever pressure testing is required. The unit is air driven with pressures up to 5,000 psi. Call for price and availability.
Deadweight Tester
The HL deadweight tester is an easy-to-use and portable primary standard capable of offering laboratory accuracy in the field. This is a self-contained unit with all necessary components stored under the cover. It is accurate to ±0.05% of the indicated reading up to 3,000 psi. Call for price and availability.
Liquid Turbine Meter with Flow Analyzer
MPM offers a NuFlo turbine flowmeter with a MC-II flow analyzer. The meter is currently set up with 3″ 300# flanges but can be set up to accommodate other setups. It will read 80-800 GPM or 2743-27423 BPD. Call for price and availability.
Chart Recorders
MPM currently has a Barton and a Partlow chart recorder set up for Pressure and Temperature. They can be used to read any normal outputs that are common in the oil and gas industry. Call for price and availability.
Load Cells
The MPM 17T load cell is designed for lifting and weighing in rugged or harsh environments. The load cell is Proof Loaded to 150% of the rated load. It comes with an integral cable that outputs 0-5v. The body is a standard Crosby G2150 shackle. Call for price and availability.
